$399.00 – $999.00
The DLT-19D is the Death Trooper bad boy.
The DLT-19D is the Death Trooper bad boy. This replica is highly detailed and cast in fiberglass so it’s only slightly heavier than a 3D print but extremely durable. Unlike a 3D print these will not break under normal trooping conditions unlike a fragile plastic blaster. Unlike a solid resin kit, they are hollow and can be equipped with LEDs and electronics.
We are one of the only makers that now offer these with fiberglass stocks and barrels. Fiberglass is very close to the weight of a 3D print but extremely durable so your investment won’t easily be breaking. The fiberglass barrel and stocks are make of two parts, a top and bottom. These can easily be trimmed and glued together to form a very strong stock tube. Any seam can be filled with body filler and sanded smooth making the seam completely invisible. Unlike a 3D print, there is very little sanding since there aren’t any print lines. Fiberglass also takes paint and finishes really well.
We offer this blaster in 3 versions:
– Fiberglass Kit for the DIY Builder- requires assembling fiberglass shells, blending with body filler, and sanding. Some smaller parts are 3D printed.In the raw kits some sanding and filing of imperfections and casting spurs is required before painting.
– a painted and finished blaster
– a Deluxe finished blaster complete with full electronics including an amplifier in the stock, and sequenced LEDs down the barrel.
Warning: this looks like a real gun. Be careful in public. Not intended as a childs toy.
This is a custom made order so please allow up to 3 weeks for deliver.
|Dimensions||41 × 13 × 13 in|
Raw Kit, Finished and Painted, Finished with Electronics